Almost no one lands an ollie on their first try.  Repetition is the most important part of learning how to ollie.  Once you learn how to do an ollie, you can try doing them while rolling.  Learning is one of the funnest parts of skateboarding.  After you learn ollies, you can move onto 180s, Pop Shove-Its, and flips.  Soon a whole world of tricks will open up.


Decks come in a variety of shapes and sizes. You can choose a mini-board, a cruiser, a drop-through or a standard deck for your favorite set of wheels and hardware. Widths range too from a few inches with a 22-inch board to the wide size of a true cruiser. Some decks are flat as possible while others are significantly concave for optimized turning. You can buy a deck with artwork and grip tape already attached for a quick install or you can get a bare-bones wooden deck to truly customize.

After you’ve properly applied a burst of force to the tail, the top-side of your front foot’s toe should start dragging up your board almost automatically. Eventually, the higher you are able to bring your front foot during lift will determine the apex of your ollie, so work gradually towards lifting your front foot as high as your body allows. Skateboarders who record the highest ollies usually (somehow manage to!) bring their feet higher than their hips!

The board also boasts of its reasonably small size and lightweight nature, making it easy to control and ride. In addition, carrying it wherever you want to go is also much easier because of its lightness. It is flexible enough that it can accommodate the needs of different kinds of users, including cruisers, travelers, beginners, expert riders, and kids.


The following descriptions cover skateboard parts that are most prevalent in popular and modern forms of skateboarding. Many parts exist with exotic or alternative constructions. A traditional complete skateboard consists of the deck (often with griptape applied on top to enhance traction), trucks (with urethane bushings), wheels (with sealed bearings), bushings, nuts and bolts to fasten the truck and wheel assembly to the bottom of the deck. Older decks also included plastic parts such as side, tail, and nose guards.
Get used to sliding your front foot up the length of the board. Once you’ve perfected lifting the front of the board up, use your back foot to hold the board in that position. Slide your front foot up the board towards the front, rotating it as you do so. The side of your foot just below the toes should grate along the deck of your board until it reaches the top.[5]
Land at the same time – Again, this is probably silly to repeat, but you’d be surprised to find out how many people execute a successful jump, and then throw their hands up in the air to celebrate their new-found triumph, and forget the most important part: landing. The best position for your feet to be in is as close to the trucks as possible. Don’t land too close to the nose or tail, or you could end up breaking off those the board itself. Also, remember to bend your knees to absorb the jump. Don’t want to land straight-legged: that’s how kneecaps are destroyed.
Almost every skate shop will have a wall of boards that is either organized by brand, size, or alphabetically. At our CCS skate shop, we have multiple walls of boards that we try and keep ordered alphabetically. A wall of skateboards, at first glance, can be overwhelming, but if you know what size and roughly what brands you like, it should be fairly easy for you to figure out what board you want. Now would be a good time to mention our CCS Skateboard Buyer’s Guide, specifically the Decks Guide. In the CCS Decks Guide, you’ll find all the information you need to gain a basic understanding of skateboard decks.
I found that my problem was unclear instruction about the timing between jumping and popping. One day when I was watching a slowmo ollie video though, I noticed that the skateboarder already was beginning to jump (at least his body was already going in an upward motion) before snapping the board off the ground. That was a critical change I needed to make in order to get it working. I had been trying to pop the board while all my weight was still pushing down on it (kind of an obvious mistake, but I somehow overlooked this). Hope this helps somebody.
500AlmostAluminatiArborBambooBirdhouseBlindBonzingCometCreatureDarkstarDB LongboardsDevilleDogtownDusters CaliforniaElementEnjoiEverseshFlipFocusFoundationGlobeGoldCoastGravityHabitatJartKebbekKrookedLandyachtzLaybackLushMadridMakahaMoonshine MFGOmenPennyPlan BPowell PeraltaPrism SkatePunkedRayneRealRememberRivieraRoad RiderSan ClementeSanta CruzSector 9Suicidal SkatesToy MachineWarehouseZ-FlexZero
In most cases, it is available in black but you can also find clear ones that are ideal for you if you want to show a specific logo. Another nice choice that you have is the die-cut grip tape, which works in displaying the color or design of the deck beneath it. Make sure to choose a grip tape at a size, which perfectly suits your skateboard’s deck.

It is mainly because those items are guaranteed to help you familiarize yourself with the ins and outs of using them. They are a big help in making you feel comfortable when you push off with your feet while also balancing on top of the board when riding. It is not good to go for a very technical product, so it’s best to choose the mentioned types first.
In general an axle width should be chosen that is close to the width of the deck it will be used with.[8] For example, a 7.75" wide deck will usually be fitted with trucks that have axles between 7.5" wide and 8.0" wide. (Standard truck axle nut size is 5/16"-24tpi UNF, and the thinner "jam" style with an optional nylon lock.) Trucks that are too wide can make doing tricks difficult and can cause the wheels to get in the way when the skateboard is being ridden. Trucks that are too small can be hard to maintain stability and can cause wheel bite to occur when turning.
Today, many riders use the “ollie-pop” on more than just the flat-level surfaces in between other tricks, it’s used heavily in the half-pipe and bowl ramps to allow the rider to go even higher in the air. Performing the “ollie-pop” while you’re at or near the top of the lip is a great way to get an extra couple feet, which might be all you need to get that extra turn in and nail the 720 (or 900, if you’re Tony Hawk).
The switch stance ollie uses a similar body motion, but the nollie is subtly distinct: For one, the rider is always moving forward, with the body positioned in a nollie stance--closer to the nose and with the front foot on the nose. Secondly the rider usually postures the body differently so as to compensate for this stance with respect to the forward motion. The rider presses the nose down using their front foot to engage the "pop" motion in order for the board to rise. This is In contrast to a "Fakie Ollie" where the pop motion is performed by the rear foot on the tail, similarly to a normal Ollie, however the rider is traveling backwards when performing a Fakie Ollie. Where in a Nollie the rider is traveling forward with their front foot on the nose to apply the initial force "pop".
The problem with wheel bite is that it tends to stop the motion of the wheels. This can result not only in a bad wipeout for the rider but also damage to the wheels. With the help of the riser pads, it is easier for you to preserve the deck of your skateboard since these pads can reduce the tendency of having stress cracks on where the trucks and deck meet.
Learning to skateboard takes dedication.   If you want to learn fast, it helps if you have an order and a strategy.   Many new skateboarders try to learn to Ollie or learn to kickfliip before they are ready.  They will try to Ollie before they can effectively push their skateboard or even do a kickturn.   This often leads to frustration and even giving up.   So, for you parents and Noobs out there, here is an outline of some of the very first things you should learn to do on a skateboard.

Get used to sliding your front foot up the length of the board. Once you’ve perfected lifting the front of the board up, use your back foot to hold the board in that position. Slide your front foot up the board towards the front, rotating it as you do so. The side of your foot just below the toes should grate along the deck of your board until it reaches the top.[5]
The Quest Super Cruiser is made of Canadian Maple and measures 31″(787mm)x8″(203mm). It has a maximum capacity of 500 lbs. The wheels have a size of 1.99″(50mm)x1.42″(36mm) Pu with logo printing. The pattern is heat transferred. The trucks are 5″ heavy duty aluminum alloy. This skateboard can provide you a high-quality ride with an entry-level price. This is the best skateboard for both beginners and price-conscious expert skaters. It has an average rating of 4.3 on Amazon.
Sizing plays an important role in the performance of any deck. A large majority range in size from 7.75" to 8.5" in width. These will provide a great platform for shredding any obstacle and will excel in street and skatepark environments alike. For those who prefer a smaller board, decks are offered down to 7.5" in width- benefiting people with smaller feet or the technical skater. Conversely, those looking for a wider board will enjoy our selection ranging up to 8.9" wide. Larger decks will accommodate those with very large feet, as well as offer an amazing experience for cruising and shredding large ramps and transitions.
Hey, welcome to the blog! My name is Billy and I've been a skateboarder now for over a decade. I know how hard it can be when learning new tricks. That’s why I decided to put up this site – to help beginner skaters find success. If you want to learn how to land skateboard tricks that will shock and amaze your friends, you've come to the right place. Bookmark this blog and come back often to learn how you can skateboard like a pro.
Grip tape is a sheet of paper or fabric with adhesive on one side and a surface similar to fine sandpaper on the other. Grip tape is applied to the top surface of a board to allow the rider's feet to grip the surface and help the skater stay on the board while doing tricks. Grip tape is usually black, but is also available in many different colors such as pink, red, yellow, checkered, camo, and even clear. Often, they have designs die-cut to show the color of the board, or to display the board's company logo. Grip tape accumulates dirt and other substances that will inhibit grip, so use of a grip eraser or rubber eraser is necessary after riding through mud or with dirty shoes.
Aaron "Jaws" Homoki Aaron Herrington Aidan Campbell Al Davis Al Partanen Alec Majerus Alex Midler Alexis Sablone Andrew Brophy Andrew Reynolds Auby Taylor Austin Kanfoush Axel Cruysberghs Bam Margera Barney Page Ben Gore Ben Hatchell Ben Krahn Ben Raemers Ben Raybourn Billy Marks Blake Carpenter Bobby de Keyzer Bobby Worrest Boo Johnson Brad Cromer Brad McClain Brad Staba Brandon Biebel Brandon Westgate Brian "Slash" Hansen Brian Anderson Brian Delatorre Brian Downey Brian Lotti Bryan Herman Carlos Iqui Casper Brooker Caswell Berry Charlie Blair Chase Webb Chico Brenes Chima Ferguson Chopper Chris Cole Chris Gregson Chris Haslam Chris Joslin Chris Miller Chris Pfanner Chris Roberts Chris Russell Chris Troy Christian Hosoi Christian Maalouf Claus Grabke Clint Walker Clive Dixon Cody Lockwood Cody McEntire Cole Wilson Collin Provost Cooper Wilt Corey Duffel Corey O'Brien Cory Kennedy Craig "Questions" Scott Cyril Jackson Daan Van Der Linden Daewon Song Dakota Servold Dan Drehobl Dan Plunkett Dane Brady Dane Burman Dane Vaughn Daniel Castillo Daniel Lutheran Danny Cerezini Danny Falla Danny Garcia Danny Montoya Danny Renaud Danny Way Darren Navarrette Dave Abair Dave Caddo David Gonzalez David Gravette Davis Torgerson Dee Ostrander Dennis Busenitz Don "Nuge" Nguyen Dustin Dollin Ed Selego Ed Templeton Emmanuel Guzman Eric Dressen Eric Koston Erick Winkowski Erik Ellington Evan Smith Felipe Gustavo Frank Gerwer Frankie Hill Gilbert Crockett Glen Fox Grant Taylor Gustav Tonnesen Guy Mariano Henry Sanchez Hiroki Muraoka Hjalte Halberg Ishod Wair Jack Curtin Jack Given Jackson "Jacko" Shapiera Jackson Pilz Jake Hayes Jake Johnson Jam Douglas James Brockman Jamie Foy Jamie Lynn Jamie Palmore Jamie Tancowny Jamie Thomas Jarne Verbruggen Jason Adams Jason Jessee Javier Sarmiento Jay Adams Jeff Grosso Jeff Kendall Jeremy Leabres Jeron Wilson Jesse Narvaez Jesus Fernandez Jim Greco Jim Thiebaud Jimmy Cao Jimmy Lannon Jimmy Wilkins Joey Guevara Joey Pepper Johan Stuckey John Cardiel John Grigley John Lucero John Lupfer John Motta Jon Dickson Jon Nguyen Jordan Hoffart Jordan Maxham Jordan Sanchez Jordan Taylor Josef Scott Jatta Josh Kalis Josh Matthews Josh Pall Julian Davidson Julien Stranger Justin "Figgy" Figueroa Justin Brock Justin Eldridge Kellen James Kelvin Hoefler Kenny Anderson Kevin "Spanky" Long Kevin Baekkel Kevin Coakley Kevin Romar Kevin Taylor Kyle Leeper Kyle Nicholson Kyle Walker Lance Mountain Lee Yankou Leo Romero Leo Valls Leticia Bufoni Lewis Marnell Lizzie Armanto Louie Barletta Louie Lopez Madars Apse Mark "Gonz" Gonzales Mark Appleyard Marquise Henry Marshall Heath Mason Silva Matt Berger Matt Hensley Matt Tomasello Mike "Lizard King" Plumb Mike Anderson Mike Arnold Mike Carroll Mike McGill Mike Mo Capaldi Mike Vallely Miles Silvas Milton Martinez Morgan Smith Natas Kaupas Neen Williams Nestor Judkins Nick Boserio Nick Garcia Nicky Guerrero Nisse Ingemarsson Nora Vasconcellos Nyjah Huston Omar Hassan Oskar Rozenberg Hallberg P.J. Ladd Paul Grund Per Welinder Peter Hewitt Peter Ramondetta Phil Hansen Quim Cardona Raney Beres Raven Tershy Ray "Bones" Rodriguez Ray Barbee Raymond Molinar Rich Adler Rick Howard Rick McCrank Ricky Oyola Riley Hawk Rob Gonzalez Rob Roskopp Robbie Brockel Robbie Russo Rodney Mullen Rodrigo "TX" Teixeira Rodrigo Petersen Ronnie Sandoval Rowan Zorilla Rudy Johnson Ryan Decenzo Ryan Lay Ryan Reyes Ryan Spencer Ryan Townley Sam Beckett Sam Hitz Samarria Brevard Sammy Baca Scott Decenzo Sean Malto Sebo Walker Shawn Hale Silas Baxter-Neal Simon Isaksson Soy Panday Stefan Janoski Steve Caballero Steve Ortega Steve Saiz Stevie Perez Stevie Williams Stu Graham Sylvain Tognelli T.J. Rogers Taylor Kirby Terry Kennedy Thaynan Costa Theotis Beasley Tiago Lemos Tim O'Connor Tobin Valverde Tom Asta Tom Karangelov Tom Knox Tom Knox (80s) Tommy Fynn Tommy Guerrero Tommy Sandoval Tony Hawk Tony Karr Tony Trujillo Torey Pudwill Trevor McClung Tristan "Tfunk" Funkhouser Tyler Bledsoe Tyler Surrey Tyson Peterson Vincent Alvarez Vivien Feil Wade Desarmo Wes Kremer Wieger Van Wageningen Willis Kimbel Windsor James Yaje Popson Yonnie Cruz Yoshi Tanenbaum Youness Amrani Yuri Facchini Zach Lyons Zack Wallin Zered Bassett Zion Wright
A skateboard consists of a deck, trucks, wheels, bearings, hardware, and griptape. All parts come in a variety of sizes, graphics, colors, and signature pro series. The deck is the essential part of any skateboard. The deck ranges generally from 7.5" to 8.5". Skaters choose their board size for many reasons, but the basic deciding factor comes down to style of skating and foot size. Transition skaters usually ride a wider deck, while street skaters tend to go with a smaller deck. Skate brands such as Girl, enjoi, and Welcome offer a wide range of boards in regards to sizes and graphics. Skateboard trucks come in either a high or low setting, and also in a range of widths. The main factors in a truck, are how well they turn, and how well they grind. Independent, Venture, and Thunder, are truck brands that are well known for their turning and grinding capabilities. The skate hardware is generally either Phillips head or Allen key bolts. The skateboard wheels range from 50mm to 60mm. Some brands offer smaller and larger sizes, but 50-60mm is the general range. Like the deck sizes, wheel sizes depend on the skater's choice of terrain: Transition skaters tend to ride bigger wheels, while street skaters usually go with smaller wheels. Bones, Spitfire, Ricta, and Wayward wheel companies all make wheels for any terrain, whether you're a street shredder or a park burner. Skate bearings follow the ABEC rating system, which includes grades 1, 3, 5, 7, and 9. Bones, Bronson, and Andale are some of the top bearing brands in the skate market. CCS proudly carries all these brands, and many more.
The switch stance ollie uses a similar body motion, but the nollie is subtly distinct: For one, the rider is always moving forward, with the body positioned in a nollie stance--closer to the nose and with the front foot on the nose. Secondly the rider usually postures the body differently so as to compensate for this stance with respect to the forward motion. The rider presses the nose down using their front foot to engage the "pop" motion in order for the board to rise. This is In contrast to a "Fakie Ollie" where the pop motion is performed by the rear foot on the tail, similarly to a normal Ollie, however the rider is traveling backwards when performing a Fakie Ollie. Where in a Nollie the rider is traveling forward with their front foot on the nose to apply the initial force "pop".
This board includes professional assembly. All Krown skateboards arrived assembled and ready to ride straight out the box. The Rookie model includes heavy duty Aluminum 5.0 trucks, 52mm 99A high-rebound urethane wheels, precision speed Abec 7 bearings, high tensile phillips head mounting hardware, and 80 grit black grip tape. Each component meets the industry standards and are a common choice of skaters worldwide.
Pull your knees up into your chest – How far you actually want to pull your legs up is totally up to you, but the higher your feet go, the higher your board will go too. By the way, the highest recorded preferred stance ollie-pop is 45 inches, done by Aldrin Garcia, and the highest switch stance ollie-pop is 40.125 inches, by Gavin Caperton. And if you’re going for endurance rather than height, the record for most consecutive hops is held by Rob Dyrdek, who did 215 of them in a row on his TV show Rob and Big. So those give you something to shoot for.
If a skateboard deck is turned over to its design side, there are two complete T-shaped pieces of metal. This piece is attached to the skateboard deck with screws. The pin is a long piece of metal that is designed to turn the skateboard deck. Adjusting its tension affects the skateboard deck's turning sensitivity. Typically, longboards have looser tension than other skateboards to allow deeper turns.
A rushed take-off might be the problem here. Steps 2-4 of this trick tip could help you out. In order to make your feet “stick” to the board, you have to do the movement fluidly. But don’t stress yourself out! You should rather start with some preliminary exercises until you feel safe while ollieing. It is also important to pull your foot up to your board’s nose in a straight manner to prevent it from spinning.
×